无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
Aluminum processing materials and processing processes
Feb 26, 2018

Aluminum processing, aluminum products for the processing of this product, so, It is referred to as aluminum processing. It contains a lot of specific content, therefore, need to be taken seriously and learn to understand, to achieve the correct operation of aluminum processing, and then get good quality products.

 

1. Raw materials of Aluminum processing

Aluminum processing, the finished product is aluminum. Therefore, its raw materials, aluminum or aluminum can be used to carry out. Moreover, it may involve plastic working of the material. Therefore, the specific requirements, it is necessary to ensure the stability of the product, as well as, have good mechanical properties and surface quality. In addition, avoid mechanical damage and rust corrosion. Therefore, the grain size and structure of the material should be strictly controlled.

In addition, you need to know if the material is aluminum alloy, then the heating temperature must be strictly controlled because the aluminum alloy has overheat sensitivity, so if it is not properly controlled, it will cause problems or adverse effects.

 

2 aluminum processing steps

Aluminum processing of the processing steps, usually is: First, the raw material is hot extruded into a blank, and then rolling or stretching, finishing and heat treatment, etc., to be finished. Or, the simpler operation is to use the hot extrusion method to get the finished product directly. In addition, the aluminum extrusion, there are cold extrusion, isothermal extrusion and hydrostatic extrusion and so on.

Extrusion of aluminum extrusion processing also can have a positive extrusion and reverse extrusion. Moreover, its extrusion speed is determined by the type of material. If you want an extrusion molding, then the extrusion coefficient, should choose the right, so as not to affect the squeeze effect.

 

3. Aluminum processing heat treatment

Aluminum processing heat treatment, which can be called the finished heat treatment, is to ensure product performance, so as to avoid problems during use. The content it contains, mainly finished annealing, solution treatment, quenching and aging treatment and so on. In addition, if necessary, you can also add a deformation heat treatment of this one. Among them, the solution treatment can improve the mechanical properties of products, toughness and stress corrosion resistance.

http://www.alucncmachining.com/