无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
Aluminum profile machining center product processing
Mar 26, 2018

When the aluminum processing center processes the products, it first cuts the aluminum profiles (it will be divided into right-angle and other-angled cuts of 60 degrees/135 degrees when cutting); The next step in the processing of the product by the center is to pay attention to punching (the hole can be divided into ordinary holes and step holes, and the step space is divided into two layers).

 

The next step in the machining of aluminum products by machining centers is tapping. (Tapping means tapping a thread in the center hole of an aluminum profile for bolt fastening purposes; after that, the aluminum machining center is The processing of the product should also pay attention to the assembly (the last is to pay attention to the framework of the assembly according to the drawings).

 

Aluminum processing center in the processing of products, we must pay attention to the selection of materials for industrial aluminum will also be very rigorous, at present our country's industrial aluminum market products are uneven, many businesses for competition and interests The product quality of industrial aluminum products is reduced. The quality problems of the products will cause serious impact on the users. In the course of use, the quality of the aluminum frame will be reduced due to quality problems. Under the influence of external forces, it may collapse and cause accidents. Therefore, the aluminum processing center must pay attention to the aluminum material before it is processed.

 

In the processing of aluminum products processing center, the material should also be selected from the weight, surface treatment of profiles, load testing with external force, bending test, and the straightness of aluminum and so on.

 

Afterwards, with regard to our aluminum profile machining center, we must pay attention to the ability to adjust the product at any angle and in any orientation. The R axis of the profile can be controlled and can be rotated 360 degrees freely. After that, it can also be set and processed according to different pads and components. Times, and all automated aluminum machining center equipment using servo drive and advanced motion control algorithms, can achieve accurate positioning of any welding point in 3D space.

http://www.alucncmachining.com/