无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
Auto parts CNC machining skills sharing
Jul 23, 2018

Auto parts CNC machining is a very sophisticated and complex process technology. In the process of processing, it is necessary to master a lot of relevant knowledge, and also requires a reasonable degree of control in operation. For better operation and use, we will simply share some tips on CNC machining of auto parts, and hope to provide some reference.

 

First of all, in the automotive parts CNC machining process, we must pay attention to the reasonable control of the speed of the white steel knife, remember that the speed can not be too fast. Moreover, when the copper is rough, the white steel knife should be used less, and the flying knife or alloy knife should be used. If the workpiece is too high, it is recommended to use a layered knife with different lengths to open the thick. After roughing with a large knife, apply a knife to remove the remaining material to ensure that the remaining amount is the same.

 

It is recommended to use flat-bottom knives for the plane machining part of CNC machining of auto parts, which can save processing time. When the copper is clearing the angle, first check the R size on the corner, and then determine how big the ball knife is. The four corners of the school plane should be flat. Moreover, before each process, it is necessary to take into account the remaining amount after the previous process, in order to avoid empty knife or excessive processing and knife.

http://www.alucncmachining.com/