无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
Auto parts cnc processing batch processing advantages and available processing forms
Jul 06, 2018

Auto parts cnc processing, which is mainly used in auto parts, and auto parts have brake pads, batteries, wipers, filters and spark plugs. These auto parts are batch processable to increase workpiece processing efficiency and throughput.

 

Since cnc has a fast processing speed and good processing quality, it can increase production efficiency and shorten the processing cycle. It is especially suitable for processing with high requirements, and can obtain products with good quality and good performance, and meet the requirements of product use.

 

CNC parts CNC machining is the use of CNC machine tools and other numerical control equipment to process auto parts, or auto parts. In this processing mode, as long as the auto parts graphics, process parameters and processing steps are written into the program code in the form of digital information, and then input into the control system of the numerical control device, and then processed into the drive servo. The command signal, thus, the various parts of the control device work in coordination, and can automatically process the auto parts and obtain the finished product.

 

 

Auto parts cnc processing can form a machining center, as long as there are four parts of the machine body, CNC system, servo system and auxiliary devices.

Machine body: It refers to the physical part of the mechanical structure, including the main drive system, feed drive system, bed, column and workbench.

CNC system: It is the control center of the machining center and an important part of the machining center. On the components, there are main control systems, controllers, input/output interfaces, keyboards and monitors.

Servo system: The CNC system and the machine body can be connected by electric drive. There are three components: servo motor, drive control system and position check and feedback device.

Auxiliary devices: mainly automatic tool changer ATC, automatic exchange table mechanism APC, workpiece tightening and relaxing mechanism, rotary table, lubrication and cooling device, automatic chip removal device, hydraulic system, pneumatic system, electrical system and overload and protection device , can be selected and determined according to the actual situation and needs of use.

http://www.alucncmachining.com/