无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
Briefly describe the specific process of oxidation profile processing
Jul 30, 2018

As for the processing of profiles, there are often many processes involved, of which the process of oxidizing profile processing is a more important part. In order to facilitate everyone to understand the processing technology of oxidized profiles, we will mainly understand the specific process of this process.

 

The first is to carry out hot water rinsing. The function of this process is to aging the film layer, and the temperature and time of the water need to be strictly controlled during the processing of the oxidized profile. This is because if the water temperature is too high or the time is too long, the film layer will be thinned and the color will be lightened. Usually, the temperature is kept at 40 to 50 ° C, and the time is controlled to be 0.5 to 1 min.

 

The second step is to carry out the drying process. It is recommended to dry it naturally. The workpiece filled with hot water is slanted on the shelf, so that the free water on the surface of the workpiece flows straight down, and the water flowing to the lower corner is sucked with a towel. Beads.

 

Then, it is necessary to aging the surface of the oxidized profile processing. This process is mainly determined according to the climatic conditions. The sunlight can be exposed to sunlight in the summer, and the oven can be baked in the rainy or winter. The process temperature is 40 to 50 °C. , time 10 to 15min.

http://www.alucncmachining.com/