无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
Surface processing grade and surface requirements of stainless steel processing
May 12, 2018

In the process of stainless steel processing, it mainly depends on the performance of stainless steel, and to a certain extent, the stainless steel products undergo bending, bending, shearing, welding and other mechanical processing to obtain the stainless steel products required for industrial production. Stainless steel processing requires a large number of instruments, stainless steel processing equipment, and a large number of machine tools.

In the production process of stainless steel, the surface of the raw material is subjected to a heat treatment and a pickling treatment after the hot rolling. In the process of use, it is generally effective for the cold rolled material, the chemical industry, and the industry. With tanks and so on.

The blunt surface of stainless steel processing is effectively made through the heat treatment and pickling after it is cold-rolled. When it is used, the material is soft, and the surface is silver-white luster for deep-drawing processing. Automotive components, water pipes, etc.

After the stainless steel processing matte is effectively cold-rolled, it is subjected to pickling and heat treatment, and it is effectively subjected to the finish-rolling process to make the surface a moderately bright one during the operation. Because the surface is smooth, easy to re-grind, so that the surface is more bright, a wide range of uses, such as tableware, building materials. After surface treatment with improved mechanical properties, almost all applications are satisfied.

Stainless steel processing to a certain extent has its better gloss and has a discontinuous coarse pattern when used, and is mainly used for interior and exterior decorative materials, electrical products and kitchen equipment, etc. during use. For baths, interior and exterior decorative materials, electrical products, kitchen equipment and food equipment.

The stainless steel wool surface, in the process of using it, will effectively produce a grinding pattern product (Subdivision No. 150-320) through the continuous grinding of its appropriate grain-polished abrasive belt. Mainly used for building decoration, elevators, doors, panels of buildings, etc.

http://www.alucncmachining.com/