无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
Three ways of industrial profiles processing and their precautions
Feb 07, 2018

In fact, there are a variety of industrial profile processing methods to complete, for example, by the workpiece in the processing temperature characteristics can be divided into hot, cold and warm processing.

What is the difference between these three industrial profiles processing methods? In the actual operation of what should pay attention?

 

The cold working of the processing method of the industrial section material refers to the plastic forming process which is completed below the temperature at which no recovery and recrystallization occur, Through this processing ,Product surface can be smooth , with accurate scale, outstanding features and functions, It can be satisfied with different functional requirements of the product.

 

Corresponding to the thermal processing of industrial profiles, is the profile of the billet in the recrystallization temperature above the plastic forming process, In the hot processing, bloom blank plastic higher resistance to deformation and lower, you can use smaller tonnage of equipment to produce larger deformation products.

 

In order to ensure the function of the product, we must control the heating temperature, deformation temperature and deformation speed, the degree of deformation and deformation temperature and deformation after the end of the cooling rate.

 

Temperature processing is also one of the commonly used methods for processing industrial profiles. It is a plastic processing process between cold and hot working. Most of them are a processing method selected to reduce the deformation resistance of metal and improve the plastic function of metal.

 

No matter what kind of industrial profile processing methods, we must pay attention to the occasion of processing, so that we can achieve the best processing results. There can not ignore the specific ingredients and formulations profiles, and easy to choose a different processing technology, get a good product.

http://www.alucncmachining.com/