无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
What are the important aspects and parameters of mechanical parts processing?
Jan 23, 2018

Mechanical parts processing, which can be referred to as mechanical parts processing, then, for this kind of processing, what should we know and understand? In response to this question, the following will be to explain the relevant knowledge in this area, or related questions to answer, so that we can learn through to the correct processing of mechanical parts, at the same time, to have good processing and processing quality.

1. Mechanical parts of the components, what is the specific?

Mechanical parts in the mechanical components, but also can be called mechanical components. From a professional point of view, it is the basic components of the machinery, and is an indispensable part of the machinery. In addition, it is also a generic term for parts and components.

2. Mechanical parts processing, the surface roughness of parts, whether there are strict requirements? Is it an important technical indicator?

Mechanical parts processing, mechanical parts surface roughness is reflected on the parts surface microscopic geometric errors, so, it is an important technical indicator, which is the main basis for testing the surface quality of mechanical parts. Therefore, the surface roughness is good or bad, will affect the product quality, service life, and its production costs of these three areas.

Mechanical parts processing methods are calculated, test and analogy these three. Among them, the more commonly used, is the analogy, because of its simple, convenient , fast , effective. However, it should be noted that sufficient reference materials should be available before proceeding.

3.In addition to surface roughness, what are more important in the processing of mechanical parts?

In the actual work of mechanical parts processing, the use of different processing equipment, even if the same size and parts tolerance, but the surface roughness requirements are still different.

So, this relates to the coordination stability problem. Therefore, in the mechanical parts design and manufacturing process, the use of different devices, we should pay attention to its stability and interchangeability can not go wrong.

http://www.alucncmachining.com/