无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
New technology for cnc machining parts for aerospace
Nov 21, 2018

Cnc machining parts for aerospace often have complex shapes and are made of special materials that are expensive, and processing these parts takes a lot of man-hours. Therefore, in the aerospace industry, the value of the workpiece and the type of material being processed requires the use of the best quality tools in most machining operations.

Due to various changes in the material composition, surface properties and depth and width of the aerospace parts, in order to ensure the quality of the machining, the optimum cutting parameters of each machined part must be accurately determined duringcnc machining parts for aerospace.

Such as acoustic emission or vibration monitoring techniques, as well as the use of inspection and tool probes to eliminate errors during tool installation and adjustment. Once all cutting parameters have been confirmed, an electronic tool change management system ensures control of the cnc machining of aerospace parts. The system can simultaneously manage the workpiece machining program and tool setting table, which ensures that the measured values are within a reasonable range.

It can then calculate the correct compensation value based on the input values, dimensions and tolerances, and the existing compensation values. It also sets an upper limit for the maximum reasonable compensation value specified in the tool wear range. If everything is ok, the correct tool offset is automatically updated, thus avoiding all manual calculations and data entry errors.

https://www.alucncmachining.com/