无锡亚博兰机械设备有限公司
Wuxi Ybolan Machinery & Equipment CO.,LTD
Home > Knowledge > Content
Safety rules to be followed in Auto Parts CNC Machining
Oct 13, 2018

First of all, in the automotive parts CNC machining, it is necessary to consciously abide by the safety regulations. Wear protective equipment according to the regulations before work, tie the cuffs, do not wear scarves, gloves, tie, apron, women workers should be in the hat. Check that the tool compensation, machine zero, workpiece zero, etc. are correct before starting up.

Secondly, before performing CNC machining operations on auto parts, it is necessary to ensure that the relative positions of the buttons are in accordance with the operational requirements. Carefully prepare and input the NC program. At the same time, it is necessary to check the operation status of the protection, insurance, signal, position, mechanical transmission part, electrical and hydraulic digital display on the equipment, and the cutting process can be carried out under all normal conditions.

Next, conduct a trial run. In this process, pay attention to the operation status of each system of the CNC machining center of the auto parts, and perform cutting processing under all normal conditions. After the machine tool enters the machining operation according to the program, the operator is not allowed to contact the workpiece, the tool and the transmission part of the athlete. It is forbidden to transfer or take tools and other items through the transmission part of the machine tool

http://www.alucncmachining.com/